A radon mitigation system is one of those home upgrades that works so quietly you forget it is there. The fan hums, the pipe runs up the side of the house, and the radon levels in your living space stay low. That is exactly how it should go. The catch is that “quiet and forgotten” can also describe a system that stopped doing its job months ago.
If you live in Colorado Springs or anywhere in the Pikes Peak region, you are in an area where radon is a fact of life. El Paso County sits in the EPA’s highest radon zone, which is why so many local homes have a system in the first place. This post covers how those systems work, the signs that something is off, what you can check yourself, and when it is time to call a pro and retest.
A Quick Look at How a Radon System Works
Radon is a radioactive gas that forms when uranium in soil and rock breaks down. It rises through the ground and can slip into your home through the slab, cracks, sump pits, and gaps around pipes. Because it is invisible and odorless, the only way to know how much is in your home is to test for it.
Most homes in our area use a method called active soil depressurization. The name is a mouthful, but the idea is simple. A contractor cuts a small hole in the slab or the crawl space liner and places a suction point beneath it. A PVC pipe connects that point to a fan, and the fan pulls radon from under the house and sends it up and out through a vent pipe, away from windows and living areas. Instead of letting radon creep into your home, the system gives it a different path to the sky.
Three parts matter most for what comes next. The fan is the heart of the system and the part most likely to wear out. The pipe and seals carry the gas and keep it from leaking back into your home. The gauge, usually a small U shaped tube called a manometer, tells you whether the system is pulling a vacuum. If you only learn one thing about your system, learn how to read that gauge.
Why Radon Systems Do Not Last Forever
A radon fan runs around the clock, every day of the year. It does not get a day off for a holiday weekend. Like any motor that runs constantly, it wears out eventually. Many fans last for years, and some go a long time, but there is no way to know exactly when yours will quit. That is why checking on it matters more than guessing.
The rest of the system can change over time, too. Houses settle. Slabs develop new cracks. A remodel might cover or crowd a pipe. A DIY project in the basement might disturb a seal. Even a well installed system sits inside a house that keeps changing around it.
Colorado winters add their own wrinkle. Moist air moving through a vent pipe can condense, and in a hard freeze that moisture can build up inside the pipe if it is not sloped or insulated well. That is a rare problem, but it is one more reason a system installed by someone who knows local conditions is worth having.
What Happens When a System Quietly Fails
Here is the part that makes regular checks worth the effort. When a radon fan stops, nothing dramatic happens. There is no alarm in most homes, no smell, and no change in how the house feels. Radon levels simply drift back toward where they were before the system went in, and the people living there have no idea.
Radon is a long game. The health concern comes from breathing elevated levels over many years, which is why a failed fan that goes unnoticed for months or years is worth catching. The good news is that catching it is easy. A glance at the gauge takes a few seconds, and a test every two years confirms the whole picture. A quick habit now saves you from wondering later whether your system has been working the entire time.
Families in Colorado Springs also tend to spend a lot of time in the lowest level of the house. Finished basements often hold bedrooms, playrooms, and home offices, and that is exactly the part of the home closest to the soil. If your system protects a basement your family uses every day, it deserves a little attention.
Signs Your Radon System May Not Be Working
You will not feel radon, so you cannot rely on how your home feels. Instead, look for these clues.
The Manometer Reading Has Changed
The manometer is the easiest check there is. It is a clear tube bent into a U shape, filled with a colored liquid, and mounted on the pipe near the fan or in the basement. When the system is running, the liquid on one side sits higher than the other. That difference shows that the fan is creating suction.
If the liquid is level on both sides, the system is probably not pulling a vacuum. That usually means the fan is off, has failed, or something is blocking the pipe. Take a quick look at the gauge now and then so you know what normal looks like for your home. Some people snap a photo of it so they can compare later.
You Hear New Noises, or No Noise at All
Most radon fans make a low hum or a soft whoosh. If you notice rattling, grinding, or a sudden increase in noise, the fan bearings may be wearing out. On the other side of things, if you used to hear the hum and now hear nothing, the fan may have stopped. Either change is worth a call.
The Fan Seems Off or the Breaker Tripped
Some systems have an indicator light or an alarm. Others have a switch near the fan or a breaker in your electrical panel. A tripped breaker or a loose plug can shut the system down without anyone noticing. It is worth checking, especially after a power outage or any electrical work in the house.
Visible Damage to the Pipe
Look at the pipe where you can see it, in the basement, the garage, or outside. Cracks, loose joints, and gaps where the pipe meets the slab can all cause trouble. If a pipe was knocked by a ladder, a snowblower, or a hailstorm, it is worth having someone take a look.
Changes to the House
Did you finish the basement, replace a sump pump lid, add a new bathroom, or have foundation work done? Any of those can change how air moves under and around your home. If your system was installed before the project, it is smart to retest afterward to confirm it still does its job.
A Test Result You Did Not Expect
This is the clearest sign of all. If a follow up test shows radon levels higher than they were after your system went in, the system is not doing what it should. The EPA recommends fixing a home when levels reach 4 picocuries per liter or higher, and says to consider it when levels fall between 2 and 4. A new test showing numbers in that range is a signal to call a professional.
What You Can Safely Check Yourself
You do not need tools or special training for a basic home check. Here is a simple routine that takes about five minutes.
Start at the manometer and make sure the liquid levels are uneven. Then listen for the fan, which is often in the attic, garage, or outside the house. Look at the visible pipe for cracks or gaps. Check that the fan is plugged in or that its breaker is on. Finally, walk around the outside of the house and make sure the vent pipe is not blocked by snow, ice, or debris.
Make a habit of doing this a couple of times a year. Tying it to something you already do, like changing smoke detector batteries, helps it stick.
What you should not do is open up the system, rewire the fan, or climb on a roof to replace parts. Radon fans involve electrical work, and the vent pipe has to be done right to protect your home and your family. If the quick check turns up a problem, that is a job for a professional.
When to Retest Your Home
Even if everything looks fine, retesting is part of owning a radon system. The EPA recommends retesting every two years after mitigation. A system can look fine and still be underperforming, and a test is the only way to be sure.
Retest sooner if you notice any of the warning signs above, if you finish or remodel part of your basement, if you have foundation or plumbing work done, or if you have had a significant change in your home, like a new roof vent or a repaired slab. Retest after any repair, too, so you know the fix worked.
If you are buying or selling a home with a system already in place, a test is a smart move. Buyers often want proof that the system is working, and sellers can feel good knowing the number on the report is current.
What a Professional Repair Visit Looks Like
When you call a radon company about a system that seems off, the first step is usually figuring out why. A technician will check the gauge, test the fan, inspect the pipe and seals, and look for any changes around the home that might affect the system. In many cases the fix is simple. A failed fan can be replaced. A cracked joint can be resealed. A blocked pipe can be cleared.
In other cases the system needs more than a quick fix. If the house has changed a lot, or the original design is not holding up in the soil conditions under your home, the technician may suggest adding a suction point or making changes to the layout. A good contractor will explain what they found and what they recommend, and will not push work you do not need.
After the repair, a follow up test confirms that levels are back down. That last step matters. It is the difference between hoping the system works and knowing it does.
Keep an Eye on It, Then Go Back to Forgetting It
The goal of a radon system is to be boring. You want it to run quietly in the background while you get on with life. A little attention a couple of times a year, plus a test every two years, keeps it that way.
Frequently Asked Questions
How do I know if my radon fan is working?
Check the manometer, the small U shaped gauge on the pipe. If the liquid is uneven, the fan is creating suction. If it is level on both sides, the fan may be off or failed. You can also listen for the low hum of the fan or check for an indicator light.
How often should I test my home after a radon system is installed?
The EPA recommends retesting every two years. You should also retest after remodeling, foundation work, or any repair to your system.
Can I replace a radon fan myself?
Radon fans involve electrical connections and a vent pipe that has to be sealed and routed correctly. It is best left to a qualified radon professional so the work is done safely and the system performs the way it should.
Why is my radon system making noise?
Rattling or grinding often points to a worn fan motor or loose mounting. A louder than usual hum can also mean something is restricting airflow. Either one is worth a call so the fan can be checked before it fails.
Does a radon system need maintenance?
The system is low maintenance, but not no maintenance. Check the gauge and listen for the fan a couple of times a year, watch for damage to the pipe, and test your home every two years.
Need Someone to Take a Look?
If your gauge looks off, your fan sounds different, or you cannot remember the last time you tested, Advanced Radon Systems can help. We serve Colorado Springs and the greater Pikes Peak region with radon testing, mitigation, and system repair. Give us a call at (719) 205-6461 and we will figure out what is going on. You can also read our guide on how to test your home for radon if you are ready to check your levels today.